The Forest Master Log Splitter Work Bench and safety guard is a unique (Community Registered Design) accessory that catches the logs as they are split and eliminates the need to bend down to pick up split logs. It makes splitting safer as logs can’t fall off as they are split.

Our safety guard allows you to split larger logs than cages from other manufacturers. With our guard the maximum log diameter is 300mm whereas most other cages only allow 250mm diameter.

Another feature of our guard is that the vertical sides do not have any holes in them, to avoid logs being trapped as they are split. Cages with holes in the sides or mesh sides, can trap logs as they split which can then damage the cage.

Simple to set up, it quickly bolts on to the log splitter in place of the standard log guide rails.

Note that this listing is only for the Splitter Work Bench and Safety Guard, the log splitter and trolley stand have to be purchased separately.

A heavy-duty moving carriage blade/pusher block carrier for electric log splitters.

FM5 Carriage Specifications:

• Length: 560mm*
• Arm Length: 500mm*
• Width to outside of carriage: 100mm*
• Width to inside of carriage: 90mm*
• Height: 215mm*
• Weight: 3.0kg*

FM8 Carriage Specifications:

• Length: 630mm*
• Arm Length: 550mm*
• Width to outside of carriage: 101mm*
• Width to inside of carriage: 89mm*
• Height: 215mm*
• Weight: 3.0kg*

FM10 Carriage Specifications:

• Length: 785mm*
• Arm Length: 700mm*
• Width to outside of carriage: 101mm*
• Width to inside of carriage: 89mm*
• Height: 206mm*
• Weight: 3.6kg*

FM16 Carriage Specifications:

• Length: 890mm*
• Width to outside of carriage: 127mm*
• Width to inside of carriage: 113mm*
• Height: 285mm*
• Weight: 4.5kg*

*All dimensions and weight are approximate.