You’ve got your work pile, you’ve got your chipper but it then decides to just not cooperate. There’s no need to panic, though as this is where our Replacement Spark Plug will get you back up and running in no time.

This replacement Spark Plug has been designed specifically to be used across our Compact Petrol Wood Chippers, so you don’t have to worry about being limited to buying different plugs for different machines.

Offering hassle-free installation and reliable operation, it has been created to withstand the rigorous demands of wood chipping, ensuring consistent ignition and efficient power delivery, so you can get back to chipping without delay.

Why is it important to maintain it? It’s simple, without a functioning spark plug, your chipper would continue to struggle with providing constant power as well as producing unusual noises and vibrations, which could damage the machine further down the line, resulting in costly repairs.

It’s compatible with the following machines:

FM6DD
FM6DD-MUL
FM6DDES
FM6DDES-MUL
FM9DDES
FM14DDES
FM18DDES

This SKU includes all the necessary spare parts you need to keep your log splitter working efficiently. Our package includes various parts such as hydraulic pumps, motors, valves, cylinders, and hoses, as well as smaller parts like bearings, seals, and o-rings.

Our spare parts are designed to be compatible with most electric log splitter models, making it easy to repair and maintain your log splitter. With this SKU, you’ll have everything you need to keep your log splitter running smoothly, ensuring you can keep up with your work without any downtime.

We understand the importance of having your electric log splitter functioning properly and are committed to providing our customers with the best quality spare parts. Our products have undergone rigorous testing to ensure they meet or exceed industry standards, providing you with peace of mind when it comes to quality.

Whether you’re a professional logger or just someone who enjoys chopping firewood, our spare parts SKU has got you covered. With our top-quality spare parts, you can extend the life of your electric log splitter, save money on costly repairs, and get back to work quickly. 

2 x FM10-064 (O-ring 10.6×2.65)
2 x FM10-101 (O-Ring 46.2×1.8)

In order to replace the O-Rings, please follow the instructions below:

To avoid losing oil, turn the log splitter upside down while removing the bracket. The splitter should be turned upside down and left for a little while before removing the pump bracket, this allows the oil to drain back into the tank.

Undo the 3 bolts holding the bracket onto the underside of the splitter (you will need an M8 socket and extension for this) and the horizontal bolt connecting the back of the motor to the underside of the splitter body. Remove the complete motor and pump bracket assembly. There are two o-rings in holes in the face of the pump bracket, remove these.

Undo the 6 bolts holding the pump bracket to the electric motor and remove the pump bracket, remove the large o-ring from the face of the pump.

Remove the pump plate (the gears and dowels should stay in place) and remove the large o-ring from the motor face.

Clean the face of the pump and place the large o-ring into the groove in the pump bracket and attach the new pump bracket to the motor with the 6 bolts. Be careful not to over tighten the bolts as this will cause the pump to jam. The normal torque is 12 ft-lbs / 16nm. If a torque wrench is not available, tighten all bolts then loosen each one by 1/4 of a turn.

Clean the top face of the pump bracket and ensure the two new small o-rings are seated correctly in the holes in the face. Refit the motor/pump assembly to the log splitter, secure with the 3 bolts and refit the horizontal bolt.

If you are only changing the two small o-rings in the top face of the pump bracket, ignore steps 3-6.

If you have any issues with completing these steps, feel free to give our technical line a call on 0191 276 6553.

The replacement bleed screw is suitable for all Electric and Petrol Forest Master Log Splitters.

– FM5 SERIES

– FM8 SERIES

– FM10 SERIES

– FM16 SERIES

Replacement motor for electric log splitters. Includes motor endplate but does not include the pump.

The 2200 watt motor is suitable for our FM5, FM8 & FM10, 5, 6 & 7 Ton machines.

The 2300 watt motor is suitable for our FM16 8 Ton machine.

Please use the drop-down box above to select the correct one for your needs.

The motors will fit other makes of a log splitter.

This is a brushless motor.

As the motors are a universal replacement to fit many brands of log splitter, the mounting bracket is predrilled with only a pilot hole. It must be drilled out to the correct diameter for the mounting bolt on the machine you are fitting it to. This is typically an 8mm bolt.

Replacement short motor for electric log splitters. Excludes motor drive end plate and pump.

The 2200 watt motor is suitable for our FM5, FM8 & FM10, 5, 6 & 7 Ton machines.

The 2300 watt motor is suitable for For our FM16 8 Ton machine.

Please use the drop-down box above to select the correct one for your needs.

The motors will fit other makes of a log splitter.

This is a brushless motor.

Replacement capacitor for the 2200 Watt & 2300 Watt electric motor on the FM8, FM10 & FM16 log splitters. May also be suitable for the motors of other makes and model of electric log splitter.

The capacitor is a suitable replacement for 5-ton, 6-ton, 7-ton and 8-ton electric motors.